Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Palm Coast Homeowners
Most chimney problems in Palm Coast stay hidden until the first cold snap, and by then a small creosote buildup or a hairline crack in the flue has had months to get worse. A professional inspection finds those problems early, while they’re still cheap to fix. Our technicians have up to 13 years of experience, and every inspection ends with a camera report and photos you can look at yourself, so you’re never asked to take our word for a recommendation. We’re licensed and insured, and estimates are free. Call (877) 471-4123 to book. We answer 24/7.
Fireplace Inspection
Fireplace Inspection is a close look at the firebox, damper, smoke chamber, and the first section of flue above the fire, the parts a fire touches directly. You need one before the first burn of the season if the fireplace sat unused through the summer, after any chimney fire, and whenever smoke backs into the room or the fire struggles to draw. In Palm Coast, where the burning season is short and intense, that usually means a fall inspection so nobody lights a fire on a dirty flue. We inspect, then recommend, then repair what’s actually broken. A standard fireplace inspection typically runs $150 to $250, depending on how many flues the firebox serves; the written estimate sets the final price.
What We Check Inside the Firebox
We look for cracked firebrick, gaps in the mortar joints, a warped or stuck damper, and rust on a metal firebox. Any of those lets heat or smoke reach places it shouldn’t, which is why they get flagged before anything gets cleaned.
Gas and Insert Fireplaces
Gas logs and wood inserts have their own venting requirements, and we inspect the vent path and connections for each type. If you’re not sure what you have, we’ll tell you once we’ve looked.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole chimney, from the crown at the top down to the smoke chamber, and they’re what you want when you suspect a problem but don’t know where it starts. A chimney that smokes, smells, or has visible damage above the roofline needs this level of look. We’re a full-service chimney specialist: inspection finds the problem, sweeping clears it, and repair fixes it, so nothing gets shuffled between contractors. Chimney Inspection Services in Palm Coast typically run $150 to $400 depending on the level of inspection and how accessible the roof and flue are. Sweeping and repair are quoted separately, and the estimate is always free.
The Full Exterior Look
We check the crown, the flashing where the chimney meets the roof, the mortar joints, and the cap. A cracked crown or a failed flashing is often the real source of water trouble, not the flue itself.

Interior and Attic Checks
We look for staining on the ceiling and chimney chase, and check any accessible attic space around the chimney for moisture or gaps. These are the clues that separate a simple cleaning from a real repair.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the flue itself, the channel that carries smoke and gases out of the house, checking for creosote buildup, cracks, gaps, and blockages. It matters most after a season of heavy burning, if you’ve noticed a chimney smell even when the fireplace is cold, or if you’ve had a bird or animal problem near the top. We run the sweep and inspect at the same visit, which is the practical way to do it, and we use a camera to see the parts of the flue the eye can’t reach. A flue-focused inspection typically runs $150 to $300, and the written estimate confirms the final number.
Creosote and Soot Levels
Creosote builds in stages, and the thicker, glazed form is the one that catches fire. We rate it and tell you plainly whether a sweep is needed now or can safely wait.
Flue Size and Liner Condition
We check the flue’s inner lining for cracks and gaps and confirm it suits the appliance it serves. An undersized or damaged flue is a common reason smoke won’t clear.
Chimney Fire
Chimney Fire damage often hides in plain sight, which is why a follow-up inspection matters so much after a fire, even a small one you think you put out. Creosote that ignites can crack the flue liner, warp a metal liner, or damage the mortar around it, and the chimney can look fine from the outside. If you’ve heard a roar or popping from the chimney, seen flames or sparks at the top, or noticed dark staining, that’s a reason to call. We inspect the flue after a chimney fire, document what’s damaged, and repair it (HeatShield resurfacing or a DuraFlex liner where the flue calls for it). Post-fire inspection typically runs $200 to $400 depending on what needs checking, and the estimate is free.
Signs of a Fire You Missed
Puffy, honeycombed creosote, cracked tiles, and heat discoloration on the cap all point to a past chimney fire. If you’ve just moved into a home, an inspection is the only reliable way to know.
What Happens Next
After a fire, we assess the liner, the smoke chamber, and the masonry around the flue. Nothing gets replaced until we can show you the evidence, and we’ll say plainly when something can wait.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the standard a home sale, a new appliance, or a change in the chimney’s use calls for, and it goes further than a basic look with a video camera scan of the flue. If you’re buying or selling a home in Palm Coast, switching to a wood insert, or had a chimney fire, this is the level you need. We run the camera the length of the flue and inspect the accessible parts of the chimney, attic, and roofline, then hand you photos and a written report. A Level 2 inspection typically costs $250 to $400 depending on how many flues and how much of the chimney is accessible. It’s the report an insurer or buyer can actually use.
When a Sale Requires One
Buyers and their lenders often want documentation before closing, and a Level 2 report gives them something concrete. Having it done early keeps the closing from stalling over the chimney.
The Video Record
A camera scan records the flue from top to bottom, so cracks and gaps get documented rather than described. You keep the footage and photos, which matters if a question comes up later.
Chimney Leak
Chimney Leak problems usually start at the top, where the crown, flashing, or cap has worn, not where you see the stain inside. If water is running down the flue or staining the ceiling, or you smell damp near the fireplace after rain, the source needs finding before the damage spreads into the framing. We check the crown, flashing, cap, and masonry, since a leak rarely comes from just one place. Repairs use Gelco and Famco caps and covers, sealed with materials rated for the job, and a leaking chimney is also often a draft problem, so we address both. Leak diagnosis with inspection typically runs $150 to $350 before any repair, and the estimate is free.
Where Water Enters
A cracked crown, failed flashing, or an open flue with no cap all let water in. We find the actual entry point rather than sealing everything and hoping.
Cap and Cover Replacement
A proper cap keeps rain, animals, and debris out while letting smoke out, and we fit Gelco and Famco caps sized to the flue. It’s a straightforward fix that prevents a lot of interior damage.
Chimney Camera Inspection
Chimney Camera Inspection puts a video camera down the flue so you can see what the technician sees, and it’s the clearest way to confirm whether a liner is sound or expensive work is actually needed. It’s the right call when there’s a stain, a smell, a past fire, or a recommendation you want to verify, and it also works as a pre-purchase check. We run a high-resolution camera the length of the flue and walk you through the footage, so nothing is based on a guess. A camera inspection typically runs $200 to $350 depending on access and how many flues are involved, with a free estimate and the photos and video included.
What the Camera Shows
The scan reveals cracks, gaps, offset joints, and creosote the eye can’t reach from the top. It’s the difference between knowing a liner is sound and hoping it is.
Footage You Keep
You get the photos and video along with our notes, so a repair recommendation is something you can check against the evidence. Call (877) 471-4123 with any questions about what the scan found.
Brands We Service
We install and service DuraFlex liners, and we know where they wear and how they fail, which matters when a flue needs relining after a chimney fire. HeatShield is the resurfacing system we use for liner repair, and it’s often the difference between extending a chimney’s life and replacing the liner outright. We fit Gelco and Famco caps and covers because they’re built for durability and proper draft control, not just for keeping rain out. And we source components from Olympia Chimney and Copperfield, so uncommon parts and specialty pieces are something we can actually get.
Each of these is a professional-grade name, the kind of material specified for commercial and high-specification work rather than the generic parts some sweeps swap in. We name them because you should know what’s going into your home, and because the choice of material affects how long the repair lasts. Whether you have DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, or Copperfield components, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fireplace that smokes is often telling you the flue is blocked, too small, or damaged. It’s a sign to get it checked before the next fire.
- Dark staining above the fireplace or at the top. Staining points to a leak or to smoke escaping where it shouldn’t. Either one is worth a look.
- A strong chimney odor when the fireplace is cold. That smell is usually creosote or moisture, and it tends to get worse, not better, on its own.
- Visible cracking in the masonry or cap. Cracks let water in and heat out of where it belongs. Small cracks are cheap to fix; structural ones aren’t.
- It’s been a season or more since the last inspection. Regular use means creosote buildup and wear you can’t see from the floor. A scheduled inspection catches it early.
Our Process, Step by Step
- 1
Book the visit and confirm what you have. We ask about the fireplace, insert, or stove and any past work, then set a time. That way the right tools and inspection level are ready when we arrive.
- 2
Inspect from the top down. We check the crown, cap, flashing, and masonry outside, then move to the flue, smoke chamber, and firebox inside, noting anything that looks off.
- 3
Run the camera. A video scan of the flue documents cracks, gaps, and creosote levels so the recommendation rests on evidence, not a hunch.
- 4
Show you what we found. We walk you through the photos and footage and give you a written report. Nothing gets sold to you before you’ve seen the reason for it.
- 5
Quote the work, then do it. If a sweep or repair is needed, you get it in writing, and the estimate is free. If the chimney can safely wait, we tell you that too.
How Much Does Chimney Inspection Cost in Palm Coast?
A typical chimney inspection in Palm Coast runs $150 to $400, depending on the level and how much of the chimney needs checking. A basic visual inspection of a single fireplace usually lands at the low end, while a Level 2 inspection with a camera scan and a written report sits at the higher end. Fireplace inspections run $150 to $250, flue-focused inspections $150 to $300, and post-fire or pre-sale inspections $200 to $400. Camera scans of the flue typically run $200 to $350.
A few things move the price. Multiple flues or appliances, roof access that’s tricky, and how much of the chimney is accessible all add to the time. Winter, when everyone wants a look before the first fire, is busier, so booking ahead helps. You avoid overpaying by getting the reason for any repair in writing with photos, and by knowing that a sweep and an inspection are separate jobs. Our estimates are free, and you’ll never be asked to commit to work before you’ve seen the camera evidence.
Every estimate is written and itemized, and the price is per job. If something can safely wait, we say so. Call (877) 471-4123 for an exact quote.
Our Service Area Near Palm Coast
We inspect chimneys across Palm Coast and the surrounding area, including Flagler Beach, Bunnell, and Flagler Estates to the west, plus Ormond Beach, Holly Hill, and St. Augustine Beach along the coast. Because these are our main service towns, we schedule them in the same runs, so a request usually gets booked into an early opening. If you’re in one of these areas, our chimney sweep Palm Coast service covers the same ground for cleaning visits. To the north and south, we cover Palm Coast, Flagler Beach, and Bunnell on the same schedule.
Serving Palm Coast, FL – Our Local Coverage Area
We serve Palm Coast and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Palm Coast
A chimney inspection is a professional look at the entire chimney, from the firebox and flue to the crown and cap, to find damage, creosote buildup, leaks, or blockages. It goes beyond cleaning by identifying problems before they turn into a fire risk or a repair bill. We pair it with a camera scan and give you a written report.
A standard inspection usually takes about 45 to 90 minutes, depending on access and how many appliances or flues are involved. A Level 2 with a full camera scan tends to run toward the longer end. We’ll tell you what to expect when you book.
A typical inspection runs $150 to $400, with a Level 2 and camera scan at the higher end. The written estimate sets the final price, and the estimate itself is free. Call (877) 471-4123 for an exact quote.
Yes. We install DuraFlex liners and use HeatShield for liner resurfacing, so a flue that needs repair comes back into service without an automatic full replacement. We also fit Gelco and Famco caps and source from Olympia Chimney and Copperfield. If you’re unsure what you have, the inspection tells us.
Same-day visits are often possible when the schedule allows, and we’ll give you the earliest opening when you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Yes. Our work carries a satisfaction guarantee, and if something we installed doesn’t perform as it should, we come back and make it right. Ask us about the details when you get your estimate.
Clear the area around the fireplace, and if you know the last time the chimney was cleaned or inspected, have that ready. Make sure we can get to the roof and the attic access if there is one. That’s all you need to do.
Schedule Your Chimney Inspection Service in Palm Coast Today
Book your chimney inspection in Palm Coast and get a camera report you can actually read, a free written estimate, and a straight answer about what needs doing now and what can wait. Our chimney sweep and chimney repair teams handle the follow-up under the same company. Call (877) 471-4123 for a no-obligation estimate. We answer 24/7.
Written by the team at Chimney Sweep Palm Coast.