Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Ormond-by-the-Sea, FL
Chimney inspection in Ormond-by-the-Sea, FL is the starting point for nearly every job we do here, because the biggest threats to a beachside chimney aren’t the ones you’d expect. Most homes in this community are 1950s to 1970s concrete-block ranches and bungalows with original masonry fireplaces, and the salt air off the ocean a block or two away does more damage to dampers, fireboxes and crowns than any fire ever will. We handle chimney inspection, sweeping and repair as one specialist team, and our technicians have up to 13 years of experience. Call (877) 471-4123 to book.
Why Ormond-by-the-Sea Homes Are Different
Ormond-by-the-Sea is a low-rise, pre-1980s beachside community, and that single fact shapes every chimney job here. The “chimney” is almost always a masonry fireplace stack in a one-story concrete-block ranch or a mid-century bungalow, not a wood stove flue. That means original dampers, smoke shelves and exterior crowns that have been sitting in salt-laden onshore air for decades. Many homes have been lightly renovated inside, but the chimney itself often still carries its 1960s hardware.
The climate does the rest. This is a subtropical beachside environment with high humidity and hurricane-season wind-driven rain, so the problems we find are rust, spalling mortar and water intrusion far more often than heavy creosote from constant winter burning. A flue can look perfectly clean and still hide a damper rusted shut and a crown crumbling from salt and rain, not fire. A smaller share of homes here are newer elevated beach houses with factory-built metal fireplaces and direct-vent flues, which get inspected and serviced very differently. If you’re comparing options across the area, our Chimney Sweep Palm Coast page covers the inland side of Flagler County. Either way, the inspection comes first and the recommendation follows the evidence.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Ormond-by-the-Sea Services
Homeowners in Ormond-by-the-Sea call us most often about two things: a chimney that needs sweeping before burning season, and a chimney that’s showing real damage from salt and rain. Here’s what each one involves locally.
Chimney Sweep in Ormond-by-the-Sea
A sweep in Ormond-by-the-Sea is as much an inspection of metal and mortar as it is a cleaning of the flue. Because the salt breeze corrodes damper assemblies and eats at mortar joints, we check the damper, firebox and crown while we’re on the roof, then sweep the flue with the right brushes for masonry. Creosote loads here are usually light, but rusted dampers and crumbling crown mortar aren’t. A flat-price sweep agreed before booking includes a camera inspection and a photo report, so you see what we see. Schedule your Chimney Sweep in Ormond-by-the-Sea before burning season starts.

Chimney Repair in Ormond-by-the-Sea
Repair work here leans heavily toward water and salt damage: spalling mortar joints, crowns that have cracked and pulled away, rusted dampers and firebox brick that’s softened over decades. We resurface liners with HeatShield where that’s the right call instead of a full teardown, install caps from Gelco and Famco to keep wind-driven rain out, and source specialty components through Olympia Chimney when a standard part won’t fit an older stack. Nothing gets recommended without camera evidence you can see, and we’ll tell you plainly when a repair can safely wait. Request Chimney Repair in Ormond-by-the-Sea when the inspection turns something up.

Chimney Inspection in Ormond-by-the-Sea
Chimney inspection in Ormond-by-the-Sea is the service that matters most, because of what homes here are made of. Most of this community’s housing went up between the 1950s and 1970s as one-story concrete-block ranches with original masonry fireplaces and single-flue stacks, and the salt-laden onshore air has been working on those dampers, fireboxes and exterior crowns ever since. High humidity and hurricane-season wind-driven rain add spalling mortar and water intrusion to the list. A chimney here can pass a quick glance and still fail an honest look, which is why every job starts with our Chimney Inspection and nothing is recommended before it’s done.
We use the inspection to establish what’s actually going on inside the flue and on the exterior stack, then show you the camera footage and photos so you can verify it yourself. That’s the whole point of inspecting first and recommending second.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if the firebox brick shows crumbling mortar, the damper sticks or stays open, or you’ve never had the fireplace looked at since buying the house.
What it costs in Ormond-by-the-Sea
A basic fireplace inspection here typically runs $99 – $199, with a camera-assisted inspection at $149 – $299, and the written estimate sets the final price.
How we do it
We check the firebox, damper, smoke shelf and hearth for rust, cracked brick and spalling mortar, photograph every finding, and explain which items are safe to leave alone for now.
Chimney Fire
Signs you need it
Call for a post-chimney-fire inspection if you’ve had a flue fire, hear a roaring sound from the chimney, see puffy or glazed creosote, or notice smoke backing into the room.
What it costs in Ormond-by-the-Sea
Inspection after a chimney fire typically ranges from $149 – $299, and repair work that follows is priced per job by the written estimate.
How we do it
We inspect the full flue with a camera for cracked tiles and heat damage, check the crown and cap, and tell you exactly what needs rebuilding before you light another fire.
Chimney Flue Inspection
Signs you need it
A flue inspection is due when you’re buying a home, switching fuel types, or noticing draft problems, rust stains or a smoky smell that won’t clear.
What it costs in Ormond-by-the-Sea
Flue inspection typically costs $99 – $249 here, with a level 2 camera inspection running $149 – $349 depending on access and flue configuration.
How we do it
We run a camera down the flue to look for cracked tiles, gaps and offset joints, check the damper and cap, and document what we find in a photo report.
What Chimney Inspection Costs in Ormond-by-the-Sea
These are the typical ranges we quote in this community. The written estimate you receive before any work starts is the final word on price.
| Item | Typical range in Ormond-by-the-Sea |
|---|---|
| Basic fireplace inspection | $99 – $199 |
| Camera-assisted flue inspection | $149 – $349 |
| Post-chimney-fire inspection | $149 – $299 |
Does a chimney in Ormond-by-the-Sea need inspecting if we rarely burn?
Yes. Salt air and wind-driven rain damage dampers, crowns and mortar whether or not you burn, so a yearly inspection is the best protection for a beachside chimney.
How long does a chimney inspection take in Ormond-by-the-Sea?
Most inspections here take 45 minutes to an hour and a half, depending on roofline access and whether the flue needs camera work. You’ll have the photo report the same visit.
Brands We Service in Ormond-by-the-Sea
We install and service products from Gelco, Famco, HeatShield and Olympia Chimney, so the parts going into your chimney are the same professional-grade names chimney specialists rely on, not generic substitutes. We can work with our brands to find uncommon components for older Ormond-by-the-Sea stacks. Turnaround depends on the part, and the written estimate tells you before we order.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Ormond-by-the-Sea, FL
Every figure below is a typical range for this community. Your written estimate confirms the price before any work begins.
| Service | Typical range in Ormond-by-the-Sea |
|---|---|
| Basic fireplace inspection | $99 – $199 |
| Camera-assisted inspection | $149 – $349 |
| Level 2 chimney inspection | $149 – $349 |
| Post-chimney-fire inspection | $149 – $299 |
| Standard chimney sweep | $149 – $279 |
| Sweep with camera inspection | $179 – $329 |
| Firebox and damper repair | $199 – $549 |
| Crown repair or rebuild | $299 – $899 |
| Chimney cap installation | $199 – $549 |
| Liner resurfacing | $899 – $2,499 |
What pushes price up here is salt and water damage: spalling crown masonry, rusted dampers that need replacement rather than freeing, and older single-flue stacks that need custom components. We agree the flat price before booking, and the written estimate you receive is the number you pay.
Neighborhoods We Serve in Ormond-by-the-Sea
We work the whole length of this beachside community, from the low-rise blocks nearest the ocean to the mid-century bungalows set back behind the dunes. Because the housing stock is compact and consistent, our Ormond-by-the-Sea response is generally quick across the community. Fall is the busiest time as homeowners book before burning season, so earlier is better. The neighborhoods we serve most often include:
- The oceanfront blocks along the dune line
- The mid-century bungalow streets west of the beach
- The older concrete-block ranch neighborhoods inland
- The newer elevated beach houses with direct-vent flues
Service Area – Cities Near Ormond-by-the-Sea
Ormond-by-the-Sea sits between the Atlantic and the mainland, so our coverage runs up and down the coast and inland through Flagler County. We work in Ormond Beach, FL just to the south, Holly Hill, FL beyond that, and Flagler Beach, FL to the north. Inland, we cover Palm Coast, FL, which is where a lot of the newer development and factory-built fireplace work sits. Every one of those areas gets the same inspection-first approach we use here.
Serving Ormond-by-the-Sea, FL – Our Local Coverage Area
We serve Ormond-by-the-Sea and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Ormond-by-the-Sea
We answer 24/7 and fast dispatch runs from 7am to 7pm. This community is compact, so once your sweep or inspection is booked we can generally get to you quickly. Call (877) 471-4123 for an exact quote.
Most structural work here, including crown rebuilds and liner work, requires a permit, so ask your city’s building department before scheduling. We can walk you through what the inspection found and what the permit will cover.
We cover this community plus Ormond Beach, Holly Hill, Flagler Beach and Palm Coast. Wherever you are in that coastal stretch, the process is the same: inspection first, a photo report, then a written estimate before any work.
If you’ve got a fireplace you haven’t had looked at, or a crown that’s crumbling from salt and rain, the place to start is a proper inspection. Call (877) 471-4123 for a free estimate, and we’ll book your sweep or inspection and show you exactly what we find. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ormond-by-the-Sea Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Danika Jackson"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jeff Parker"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Tracy Meyer